Demo 2 fix list #20

New issue

Closed

opened 2018-11-11 18:37:42 +00:00 by Squatnet · 4 comments

Squatnet commented

2018-11-11 18:37:42 +00:00

(Migrated from github.com)

sending matX message shuts down board B
find out why strip PSUs did not work (fingers crossed its just something simple)
Scroll text updating still not right. possible fix by forcing pattern 0 before showing ptrn 9
HC05 tx/rx needs securing / master needs larger enclosure?

Moved to DV2
~~- [x] Add a mode to allow automatic color but not pattern... (enhancement)~~
~~- [x] Implement ALLX page on Godot App ( and fix it up a bit )~~

- [x] sending matX message shuts down board B - [x] find out why strip PSUs did not work (fingers crossed its just something simple) - [x] Scroll text updating still not right. possible fix by forcing pattern 0 before showing ptrn 9 - [x] HC05 tx/rx needs securing / master needs larger enclosure? ___ Moved to DV2 ~~- [x] Add a mode to allow automatic color but not pattern... (enhancement)~~ ~~- [x] Implement ALLX page on Godot App ( and fix it up a bit )~~

Squatnet commented

2018-11-11 19:38:21 +00:00

(Migrated from github.com)

#21 Should fix sending matX message shuts down board B

Riolaurenti commented

2018-11-11 19:40:59 +00:00

(Migrated from github.com)

PSU's are dead, It's my fault entirely. seems two strips which weren't supposed to be in the box, were in the box.. thus shorted... lucky we didn't short rig frankly. :/
Lesson learned.
50% of strips are defective in some way or another, built test circuit with a proMini.
Will seek better quality profiles for outdoor and transported lights, opting for those cheap chinese pieces in static installation only.

PSU's are dead, It's my fault entirely. seems two strips which weren't supposed to be in the box, were in the box.. thus shorted... lucky we didn't short rig frankly. :/ Lesson learned. 50% of strips are defective in some way or another, built test circuit with a proMini. Will seek better quality profiles for outdoor and transported lights, opting for those cheap chinese pieces in static installation only.

👍 1

Squatnet commented

2018-11-11 19:54:00 +00:00

(Migrated from github.com)

yeah fair comment. Defo think that having a test bed for strips and various wires is a fantastic idea. Sett all the leds to white on strips and run a couple simple patterns and possibly just showing a green LED if a cable is good...

Squatnet commented

2018-11-11 19:54:34 +00:00

(Migrated from github.com)

#22 might help with Scroll text bug ( namely artifacts being left over from previous pattern )